Integrity, honesty, hard work, passion, sense of mission, sense of belonging, loyalty to the company.
Talented and moral, special promotion; Talented but immoral, limited use; Moral but untalented, training and use; Untalented and immoral, resolutely not use
Focus on knowledge accumulation, courage to innovate and practice, encourage internal sharing, and promote experience inheritance
Submit resume to: hr@bsjkj.com
Contact us:
13824202394 (WeChat/Telephone number) Ms. Zhang
13802354530 (WeChat/Telephone number) Ms. Chen
13530852069 (WeChat/Telephone number) Ms. Wu
Insurance and Housing Provident Fund
Performance Bonus
Year-end Bonus
Holiday Welfare
Colorful Activities
Team Travel
Salary: 8~15K
Job Responsibilities:
1. Responsible for business development and maintenance in overseas markets.
2. Responsible for the marketing and sales of products in target market areas.
3. Collect and feedback customer information, and complete the reporting and analysis of sales reports in a timely manner.
4. Cooperate with relevant departments to conduct market research, competitor analysis and other related work.
5. Perform other tasks assigned by superior leaders.
Job requirements:
1. Priority will be given to those with relevant work experience.
2. Applicants who are familiar with overseas channels and business processes will be given priority.
3. Ability to work independently and withstand pressure.
4. Have good communication skills and good teamwork spirit.
Salary: 10~20K
Job Responsibilities:
1. Design product schematic diagram and PCB layout according to project requirements;
2. The application software requires PCB LAYOUT: ALLEGRO or PADS;
3. Be familiar with the basic characteristics and application principles of key components;
4. Plan product design solutions and architecture;
5. Debugging prototypes, solving problems encountered in production and design, proposing feasible rectification plans and implementing them.
6. Write product hardware related documents, such as test documents, debugging reports, etc.
job requirements:
1. College degree or above, major in electronics or communications;
2. Familiarity with HiSilicon and Allwinner platforms is preferred, and can effectively avoid design risks in the early stage of design; have multiple complete high-speed project design experience.
3. Have the ability to debug, check and rectify hardware designs and solve difficult hardware problems;
4. Familiar with DDR2, DDR3, EMMC, I2C, SPI, MIPI, RGB, LVDS and other high-speed circuits and their application principles.
5. Strong pressure-bearing ability, hands-on ability, quick response, and good at communication.
Salary: 10~20K
Job Responsibilities:
1. According to the company's project needs, be responsible for the conception and design of product appearance structure plans, and propose your own design ideas;
2. Arrange for product prototype production and proofing, verification, and issue proofing materials;
3. Project communication and follow-up, pre-mold evaluation, trial mold inspection, mold verification, and product approval;
4. Output structure-related data (structural parts BOM, product drawings, instruction manual drawings);
5. Structural sample testing, small batch trial production follow-up, analysis and improvement of causes of undesirable phenomena and abnormal production and assembly, to meet product appearance and production and assembly requirements;
6. Continuously optimize products by improving and optimizing design plans, improving materials, and increasing the quality of parts
Versatility controls costs;
7. Complete other tasks assigned by superior supervisor.
job requirements:
1. Be able to use drawing software such as PRO/E and CAD;
2. Understand plastic and sheet metal related processing techniques;
3. 1 year or more working experience in structural positions;
4. Work proactively, seriously and responsibly.
Salary: 10~20K
Job Responsibilities:
1. Proficient in C language and understand C++ programming language and program debugging;
2. Familiar with the embedded development process and uCOS or freeRTOS embedded operating system;
3. Have experience in developing ARM/Cortex-M series MCUs, be familiar with the ARM microcontroller architecture, have experience in software design and development of STM32 (ARM Cortex-M3) microcontrollers, and be able to independently undertake software programming of STM32 application systems;
4. Familiar with Linux system knowledge and proficient in Linux driver programming;
5. Applicants with MTK6260/6261/2503/2502/Zhanrui 8910/ASR1802 development experience will be given priority;
6. Applicants with experience in developing GPS positioning products or communication modules will be given priority.
job requirements:
1. Bachelor degree or above, major in software or electronic communications, more than 2 years of work experience;
1. Applicants who are familiar with vehicle-mounted TBOX products, CAN protocols, and vehicle-mounted video terminal development experience will be given priority;
2. Familiar with GPS/Beidou positioning modules, 2G/4G communication modules, and those with experience in GPRS application development are preferred;
3. Be familiar with ucos-II system application programming and master the transplantation of ucos-II under M3 architecture.
Salary: 10~20K
Job Responsibilities:
1. According to the overall system design, conduct outline design, detailed design, coding and unit testing of a certain module of the system;
2. Design and develop high-performance, easily scalable system application framework (SDK framework, integration test framework);
3. Productization support (support for trial production of newly developed or incrementally developed products; software maintenance for mass-produced products).
job requirements:
1. Bachelor degree or above, major in computer software, communications, electronics, etc.;
2. More than 1 year of practical application development experience, familiar with Linux POSIX interface (open/read/write/mmap, etc.);
3. Familiar with multi-process and thread programming, inter-process communication, process scheduling, memory allocation and management;
4. Candidates who work diligently and meticulously and can quickly learn and master new knowledge will be given priority;
5. Applicants with background from original chip manufacturers (HiSilicon, Allwinner, etc.) will be given priority.
Salary: 10~20K
Job Responsibilities:
1. Responsible for common peripheral drivers on Linux platform, such as 4G, Camera, LCD, TP, BT and various sensor modules;
2. Familiar with common Linux buses such as UART, I2C, SPI, USB, etc., and corresponding peripheral driver debugging;
3. Coordinate with hardware engineers to track and analyze driver issues, and evaluate and verify similar alternative devices.
job requirements:
1. Bachelor degree or above, major in computer software, communications, electronics, etc.;
2. More than 1 year of actual driver development experience, familiar with Linux device driver models;
3. Be familiar with ARM system architecture, understand basic hardware circuit principles and use of tools (such as oscilloscopes, logic analyzers, etc.);
4. Applicants who are familiar with process scheduling, memory management, and system startup procedures will be given priority;
5. Candidates with background from original chip manufacturers (HiSilicon, Allwinner, etc.) will be given priority;
6. Work diligently and meticulously, and have good learning ability.
Salary: 10~20K
Job Responsibilities:
1. Responsible for the design, analysis and optimization of image algorithms in embedded products;
2. Track technological development trends in related fields, participate in the research and development of graphics and image processing, computer vision-related algorithms and the writing of application programs, and develop new algorithms for practical problems;
3. Writing and updating design documents;
4. Other related matters.
job requirements:
1. Bachelor degree in computer technology, image processing, pattern recognition, machine vision and applied mathematics and other related majors. The research direction is machine vision and image processing. A solid mathematical foundation. Fresh graduates or those with relevant work experience are welcome;
2. Solid mathematical derivation ability, and ability to develop algorithms for video image processing and pattern recognition;
3. Master c/c++, familiar with data structures, opencv;
4. Candidates with experience in successfully applying deep learning to commercial products in the field of industrial vision will be given priority;
5. Be down-to-earth and pragmatic, have good teamwork spirit, good professional ethics, and have excellent independent learning ability and self-management ability;
6. Priority will be given to acm/icpc winners.
Salary: 6~12k
Job Responsibilities:
1. Responsible for standardizing the market prospects of responsible products, standardizing product functions and promotion directions;
2. Fully understand product needs and analyze and evaluate the needs submitted by users;
3. Be familiar with the product development process, follow up on product development and production progress, and ensure fast and high-quality product development and production;
4. Good at managing teams, effectively organizing the team's work progress, and coordinating the work of various departments;
5. Be familiar with product functions and be responsible for training the market and technical support teams;
6. Ensure the smooth progress of product design, development and production;
7. Conduct product market analysis, track product operation, and feedback customer experience, suggestions and industry-related conditions to R&D.
job requirements:
1. Work meticulously and patiently, have a strong sense of responsibility for work, and have good team spirit;
2. Good logical thinking ability, ability to analyze and solve problems, and good execution ability;
3. Have certain document writing capabilities and be good at writing documents;
4. Good communication skills, need to coordinate work and solve problems across departments.
Salary: 5~8K
Job Responsibilities:
1. Cooperate with the sales department in pre-sales work of products, including product demonstrations and communication of test requirements;
2. Product installation support, online debugging, backend server installation and maintenance, and answers to various questions;
3. Responsible for improving and updating product after-sales documentation, including product manuals, function descriptions, etc.
Qualifications:
1. College degree or above, major in electronic information engineering;
2. Strong practical ability and master basic science and engineering knowledge;
3. Have teamwork spirit and good expression and communication skills;
4. Be able to accept business trips, be enthusiastic, proactive, meticulous and patient, and be able to withstand greater work pressure;
5. More than 1 year of technical support work experience, outstanding fresh graduates are also acceptable.
Salary: 7~12k
Job Responsibilities:
1. Lead the introduction and mass production of new products.
2. According to the arrangement of the project manager, connect with the production PE, IE and QE to introduce new products.
3. Responsible for the verification of new processes during new product development.
4. Responsible for the evaluation of manufacturability during the development process of new products.
5. Responsible for improving the trial production yield rate and efficiency of new products, and organizing the project team to review and improve trial production problems.
6. Responsible for connecting with customer NPI and maintaining positive interaction.
job requirements:
1. Good external and internal communication skills.
2. Have strong self-motivation to learn, and experience in electronic product NPI is preferred.
3. Results-oriented responsibility.
4. Familiar with quality system processes, especially PPAP, APQP and change management processes.
5. Have good copywriting and editing skills, and be proficient in preparing SOP, CP, PFMEA and other process documents.
Salary: 5~8k
Job Responsibilities:
1. Assist sales staff to formulate contracts and orders, send samples and follow up, and handle after-sales services (technical, repair);
2. Responsible for receiving orders, checking product quantity, unit price, address, etc., shipping, reconciliation, invoicing, and determining the delivery date with relevant departments to reply to customers;
3. Payment settlement, assist sales staff to follow up and collect payment, and promptly remind sales staff of relevant receivables;
4. Conduct regular telephone follow-up visits to key customers, maintain good customer relationships, proactively enhance understanding with customers, and introduce the company's new products.
job requirements:
1. College degree or above, cheerful personality, full of passion and enthusiasm;
2. Have strong learning ability and stress resistance, good communication and expression skills;
3. Have good team awareness and sense of responsibility.